Ugrás a tartalomra

Hogyan mozgassuk a teljes sort az aktív lap aljára az Excel cellája alapján?

Ha az Excel cellájának értéke alapján a teljes sort az aktív lap aljára kívánja áthelyezni, kérjük, próbálja ki a VBA kódot ebben a cikkben.

Mozgassa a teljes sort az aktív lap aljára a VBA kóddal ellátott cellaérték alapján


Mozgassa a teljes sort az aktív lap aljára a VBA kóddal ellátott cellaérték alapján

Például, ahogy az alábbi képernyőképen látható, ha a C oszlop cellája tartalmaz egy bizonyos „Kész” értéket, akkor vigye a teljes sort az aktuális lap aljára. Kérjük, tegye a következőket.

1. nyomja meg más+ F11 gombok egyszerre a Microsoft Visual Basic for Applications ablak.

2. Ban,-ben Microsoft Visual Basic for Applications ablakban kattintson betétlap > Modulok. Ezután másolja és illessze be az alábbi VBA kódot az ablakba.

VBA kód: Mozgassa a teljes sort az aktív lap aljára a cella értéke alapján

Sub MoveToEnd()
    Dim xRg As Range
    Dim xTxt As String
    Dim xCell As Range
    Dim xEndRow As Long
    Dim I As Long
    On Error Resume Next
    If ActiveWindow.RangeSelection.Count > 1 Then
      xTxt = ActiveWindow.RangeSelection.AddressLocal
    Else
      xTxt = ActiveSheet.UsedRange.AddressLocal
    End If
lOne:
    Set xRg = Application.InputBox("Select range:", "Kutools for Excel", xTxt, , , , , 8)
    If xRg Is Nothing Then Exit Sub
    If xRg.Columns.Count > 1 Or xRg.Areas.Count > 1 Then
        MsgBox " Multiple ranges or columns have been selected ", vbInformation, "Kutools for Excel"
        GoTo lOne
    End If
    xEndRow = xRg.Rows.Count + xRg.Row
    Application.ScreenUpdating = False
    For I = xRg.Rows.Count To 1 Step -1
        If xRg.Cells(I) = "Done" Then
           xRg.Cells(I).EntireRow.Cut
           Rows(xEndRow).Insert Shift:=xlDown
        End If
    Next
    Application.ScreenUpdating = True
End Sub

Megjegyzések: A VBA kódban „csinált”Az a cellaérték, amely alapján a teljes sort áthelyezi. Szükség szerint megváltoztathatja.

3. megnyomni a F5 gombot a kód futtatásához, majd az előugró ablakban Kutools az Excel számára párbeszédpanelen válassza ki azt az oszloptartományt, amelyben a bizonyos érték létezik, majd kattintson a gombra OK gombot.

A kattintás után a OK gombra kattintva a teljes sor, amely a megadott oszlopban a „Kész” értéket tartalmazza, automatikusan az adattartomány aljára kerül.


Kapcsolódó cikkek:

A legjobb irodai hatékonyságnövelő eszközök

🤖 Kutools AI Aide: Forradalmasítsa az adatelemzést a következők alapján: Intelligens végrehajtás   |  Kód létrehozása  |  Hozzon létre egyéni képleteket  |  Adatok elemzése és diagramok létrehozása  |  A Kutools funkciók meghívása...
Népszerű szolgáltatások: Ismétlődések keresése, kiemelése vagy azonosítása   |  Üres sorok törlése   |  Oszlopok vagy cellák kombinálása adatvesztés nélkül   |   Kerek Formula nélkül ...
Szuper keresés: Több kritérium VLookup    Többértékű VLookup  |   VLookup több munkalapon   |   Fuzzy Lookup ....
Speciális legördülő lista: Gyors legördülő lista létrehozása   |  Függő legördülő lista   |  Többszörösen válassza ki a legördülő listát ....
Oszlopkezelő: Adjon meg egy adott számú oszlopot  |  Oszlopok mozgatása  |  Kapcsolja be a Rejtett oszlopok láthatósági állapotát  |  Tartományok és oszlopok összehasonlítása ...
Kiemelt funkciók: Rács fókusz   |  Design nézet   |   Nagy Formula bár    Munkafüzet és lapkezelő   |  Erőforrás-könyvtár (Auto szöveg)   |  Dátumválasztó   |  Kombinálja a munkalapokat   |  Cellák titkosítása/dekódolása    E-mailek küldése listánként   |  Szuper szűrő   |   Speciális szűrő (félkövér/dőlt/áthúzott szűrés...) ...
A 15 legjobb eszközkészlet12 szöveg Eszközök (Szöveg hozzáadása, Karakterek eltávolítása,...)   |   50 + Táblázatos Típusai (Gantt-diagram,...)   |   40+ Praktikus képletek (Számolja ki az életkort a születésnap alapján,...)   |   19 beszúrás Eszközök (Helyezze be a QR-kódot, Kép beszúrása az útvonalból,...)   |   12 Átalakítás Eszközök (Számok szavakig, Valuta átváltás,...)   |   7 Egyesítés és felosztás Eszközök (Haladó kombinált sorok, Hasított sejtek,...)   |   ... és több

Töltsd fel Excel-készségeidet a Kutools for Excel segítségével, és tapasztald meg a még soha nem látott hatékonyságot. A Kutools for Excel több mint 300 speciális funkciót kínál a termelékenység fokozásához és az időmegtakarításhoz.  Kattintson ide, hogy megszerezze a leginkább szükséges funkciót...

Leírás


Az Office lap füles felületet hoz az Office-ba, és sokkal könnyebbé teszi a munkáját

  • Füles szerkesztés és olvasás engedélyezése Wordben, Excelben és PowerPointban, Publisher, Access, Visio és Project.
  • Több dokumentum megnyitása és létrehozása ugyanazon ablak új lapjain, mint új ablakokban.
  • 50% -kal növeli a termelékenységet, és naponta több száz kattintással csökkenti az egér kattintását!
Comments (30)
Rated 4.75 out of 5 · 2 ratings
This comment was minimized by the moderator on the site
How can you automatically move the rows in an online excel sheet?
This comment was minimized by the moderator on the site
Is there any way I can do this in an online excel sheet?
This comment was minimized by the moderator on the site
Is there a way to move rows back to the original place when the status of the input changes? For example if someone changes it from "Done" to "incomplete", is there a way to program excel to move it back?
Also, is this change permanent ? I've noticed after working the first time, it stopped working after that.

Thank you for your help and post!
Rated 4.5 out of 5
This comment was minimized by the moderator on the site
Hi zoe,

Thank you for your comment.
1. For the first question:
The row that was moved can't be moved back to its original place;
2. For the second question:
This VBA code needs to be run manually each time you need to move rows. If you want to move the row automatically when the cell value matches the condition, you can try the following VBA code.
Notes: You need to put this code in the Sheet (Code) editor (Right click the sheet tab and select View Code to open the editor). And change the column range B2:B12 to your own range.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
'Updated Extendoffice 20230111
    Dim xRg As Range
    Dim xTxt As String
    Dim xCell As Range
    Dim xEndRow As Long
    Dim I As Long
    On Error Resume Next
    If ActiveWindow.RangeSelection.Count > 1 Then
      xTxt = ActiveWindow.RangeSelection.AddressLocal
    Else
      xTxt = ActiveSheet.UsedRange.AddressLocal
    End If
lOne:
    Set xRg = Range("B2:B12")
    If xRg Is Nothing Then Exit Sub
    If xRg.Columns.Count > 1 Or xRg.Areas.Count > 1 Then
        MsgBox " Multiple ranges or columns have been selected ", vbInformation, "Kutools for Excel"
        GoTo lOne
    End If
    xEndRow = xRg.Rows.Count + xRg.Row
    Application.ScreenUpdating = False
    For I = xRg.Rows.Count To 1 Step -1
        If xRg.Cells(I) = "Done" Then
           xRg.Cells(I).EntireRow.Cut
           Rows(xEndRow).Insert Shift:=xlDown
        End If
    Next
    Application.ScreenUpdating = True

End Sub
This comment was minimized by the moderator on the site
Hi Crystal,

Thank you for all of the great codes. Is there a way to do this without the Kutools? I also don't see a dialog box to select a cell range, it isn't popping up for me.

Thank you,
Jaz
Rated 5 out of 5
This comment was minimized by the moderator on the site
Hi Jaz,
You can specify the cell range directly in the code without having to pop up the Kutools dialog box to select the range.
In the code, please replace the following line:
Set xRg = Application.InputBox("Select range:", "Kutools for Excel", xTxt, , , , , 8)

with:
Set xRg = Range("C2:C13")
This comment was minimized by the moderator on the site
me again! I figured the code out. I had manually copied and pasted the code rather than use the copy button on the top right of the screen. I changed "done" to "x". I have run the code in each of the worksheets. As I start entering in "x" in those cells within the selected cell ranges from the dialog box, nothing happens (rows do not automatically move down to the bottom). I am VERY NEW to this....thanks for your help!
This comment was minimized by the moderator on the site
Hi,
If you want to automatically move the row to bottom when entering the specified word, please try the following VBA code.
Note: you need to enter the code into the Worksheet code window (right click the sheet tab and select View Code from the context menu).

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
'Updated by Extendoffice 20220520
    Dim xRg As Range
    Dim xTxt As String
    Dim xCell As Range
    Dim xEndRow As Long
    Dim I As Long
    On Error Resume Next
    If ActiveWindow.RangeSelection.Count > 1 Then
      xTxt = ActiveWindow.RangeSelection.AddressLocal
    Else
      xTxt = ActiveSheet.UsedRange.AddressLocal
    End If
lOne:
    Set xRg = Range("C2:C18")
    If xRg Is Nothing Then Exit Sub
    If xRg.Columns.Count > 1 Or xRg.Areas.Count > 1 Then
        MsgBox " Multiple ranges or columns have been selected ", vbInformation, "Kutools for Excel"
        GoTo lOne
    End If
    xEndRow = xRg.Rows.Count + xRg.Row
    Application.ScreenUpdating = False
    For I = xRg.Rows.Count To 1 Step -1
        If xRg.Cells(I) = "Done" Then
           xRg.Cells(I).EntireRow.Cut
           Rows(xEndRow).Insert Shift:=xlDown
        End If
    Next
    Application.ScreenUpdating = True
End Sub
This comment was minimized by the moderator on the site
Hi! I just purchased kutools so that I could *** this vba code to my excel sheet, as it will be an excellent feature to use! The instructions above are simple and helpful; however, once I get to the step where the code is copied and pasted in the window and press F5, it sent me to a box to name and create the macro. I did that but now it won't take me to the dialog box so I can select cell range. A compile error of "invalid outside procedure" pops up. Please help!
This comment was minimized by the moderator on the site
Hi,
I'm sorry to have misled you. The code can be used on its own and does not require the purchase of Kutools. If you don't need it, please email to to ask for a refund.
For the code to work smoothly, you need to make sure that your cursor is in the code window (click on any word in the code), then press the F5 key to run the code. Then the dialog box to select a cell range will pop up.
Sorry again for the inconvenience.
This comment was minimized by the moderator on the site
I have a list with check boxes that when one column is checked I need it to go to one section of the spreadsheet and if the other is checked instead it goes to the end. I have tried a hundred diff ways to do this can anyone help with this?
This comment was minimized by the moderator on the site
Hi Crystal,
Thanks for you help, the code works great but rather than move the row to the bottom of a page how to I move it to another tab i.e. a "Closed" tab?
This comment was minimized by the moderator on the site
Hi,
Sorry for replying so late.
In the code, you just need to change the line "If xRg.Cells(I) = "Done" Then" to If xRg.Cells(I) Like "*Done*" Then to get it done.
This comment was minimized by the moderator on the site
How do it if "Done" is only a part of a column string. Suppose my Columns contains value like - XYZDone, ABCDone, 123Done etc, can I just filter out based on partial string "Done"?
This comment was minimized by the moderator on the site
Hello, I have a task my boss has given me. It seemed simple enough at first but now I am confused as how to proceed. We have a Forecast sheet of the possible jobs and they have a "Order Probability" column by %. He wants me to set up 3 different sheets with 100-70%, 69%-41, and 40-0%. The idea is that as the information is typed inot the master sheet, when the percentage is entered in, it automatically gets copied into the proceeding sheet matching that percentile rage. I did this with a simple IF(and formula. However i need to sort inorder to loose the empty cells and make it look cleaner. Then when i sort , if i add a new Oder Probability offer to the master sheet, it does not automatically show it, without unsorting then sorting again. I apologize if this question does not belong her. But is there a string of code i could put in that would handle this issue easier? The only value that determines if the whole row gets moved is the K column. seems simple, but however complex for this excel beginner. Thanks in advance for your help.
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations