Ugrás a tartalomra

Hogyan futtathatja ugyanazt a makrót több munkalapon egyszerre az Excelben?

Normál esetben egy makrót futtathatunk egy munkalapon. Ha több lapra van szükség, ugyanazt a makrót kell alkalmazni, akkor egyenként kell elindítania a kódot. Ha van más gyors módja annak, hogy ugyanazt a makrót több munkalapon futtassa egyszerre az Excelben?

Futtassa vagy futtassa ugyanazt a makrót több munkalapon egyszerre, VBA-kóddal


Futtassa vagy futtassa ugyanazt a makrót több munkalapon egyszerre, VBA-kóddal

Ha makrót szeretne egyszerre több lapon futtatni anélkül, hogy egyesével indítaná azt, alkalmazhatja a következő VBA kódot, kérjük, tegye a következőket:

1. Tartsa lenyomva a ALT + F11 billentyűk megnyitásához Microsoft Visual Basic for Applications ablak.

2. Kattints betétlap > Modulok, és illessze be a következő makrót a Modulok Ablak.

VBA-kód: Futtassa ugyanazt a makrót több munkalapon egyszerre:

Sub Dosomething()
    Dim xSh As Worksheet
    Application.ScreenUpdating = False
    For Each xSh In Worksheets
        xSh.Select
        Call RunCode
    Next
    Application.ScreenUpdating = True
End Sub
Sub RunCode()
    'your code here
End Sub

Megjegyzések: A fenti kódba másolja és illessze be saját kódját a alatt címsor és End Sub lábléc a Sub Runcode () és a End Sub szkriptek. Lásd a képernyőképet:

doc futtassa a makrót az összes lapon 1

3. Ezután tegye a kurzort az első makróra, és nyomja meg a gombot F5 gombot a kód futtatásához, és a makrokódot egyenként alkalmazzuk.


Távolítsa el az összes makrót több munkafüzetből:

Kutools az Excel számára's Kötegelt összes makró eltávolítása segédprogram segítségével eltávolíthatja az összes makrót több munkafüzetből, amire szüksége van. Töltse le és ingyenes próbaverziója a Kutools for Excel alkalmazást most!

doc futtassa a makrót, ha a cella megváltozik 3

Kutools az Excel számára: több mint 300 praktikus Excel-bővítménnyel, ingyenesen, korlátozás nélkül, 30 nap alatt kipróbálható. Töltse le és ingyenes próbaverziót most!

A legjobb irodai hatékonyságnövelő eszközök

🤖 Kutools AI Aide: Forradalmasítsa az adatelemzést a következők alapján: Intelligens végrehajtás   |  Kód létrehozása  |  Hozzon létre egyéni képleteket  |  Adatok elemzése és diagramok létrehozása  |  A Kutools funkciók meghívása...
Népszerű szolgáltatások: Ismétlődések keresése, kiemelése vagy azonosítása   |  Üres sorok törlése   |  Oszlopok vagy cellák kombinálása adatvesztés nélkül   |   Kerek Formula nélkül ...
Szuper keresés: Több kritérium VLookup    Többértékű VLookup  |   VLookup több munkalapon   |   Fuzzy Lookup ....
Speciális legördülő lista: Gyors legördülő lista létrehozása   |  Függő legördülő lista   |  Többszörösen válassza ki a legördülő listát ....
Oszlopkezelő: Adjon meg egy adott számú oszlopot  |  Oszlopok mozgatása  |  Kapcsolja be a Rejtett oszlopok láthatósági állapotát  |  Tartományok és oszlopok összehasonlítása ...
Kiemelt funkciók: Rács fókusz   |  Design nézet   |   Nagy Formula bár    Munkafüzet és lapkezelő   |  Erőforrás-könyvtár (Auto szöveg)   |  Dátumválasztó   |  Kombinálja a munkalapokat   |  Cellák titkosítása/dekódolása    E-mailek küldése listánként   |  Szuper szűrő   |   Speciális szűrő (félkövér/dőlt/áthúzott szűrés...) ...
A 15 legjobb eszközkészlet12 szöveg Eszközök (Szöveg hozzáadása, Karakterek eltávolítása,...)   |   50 + Táblázatos Típusai (Gantt-diagram,...)   |   40+ Praktikus képletek (Számolja ki az életkort a születésnap alapján,...)   |   19 beszúrás Eszközök (Helyezze be a QR-kódot, Kép beszúrása az útvonalból,...)   |   12 Átalakítás Eszközök (Számok szavakig, Valuta átváltás,...)   |   7 Egyesítés és felosztás Eszközök (Haladó kombinált sorok, Hasított sejtek,...)   |   ... és több

Töltsd fel Excel-készségeidet a Kutools for Excel segítségével, és tapasztald meg a még soha nem látott hatékonyságot. A Kutools for Excel több mint 300 speciális funkciót kínál a termelékenység fokozásához és az időmegtakarításhoz.  Kattintson ide, hogy megszerezze a leginkább szükséges funkciót...

Leírás


Az Office lap füles felületet hoz az Office-ba, és sokkal könnyebbé teszi a munkáját

  • Füles szerkesztés és olvasás engedélyezése Wordben, Excelben és PowerPointban, Publisher, Access, Visio és Project.
  • Több dokumentum megnyitása és létrehozása ugyanazon ablak új lapjain, mint új ablakokban.
  • 50% -kal növeli a termelékenységet, és naponta több száz kattintással csökkenti az egér kattintását!
Comments (16)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
The original macro "How to run the same macro on multiple worksheets at same time in Excel" is fantastic for my purposes, thanks so much. I was wondering if there's a way to get it to return to the first worksheet where I have a control to run the macro. Currently it goes through 25 worksheets doing my code (autofit & Sort by date) and stops once it's done the last worksheet of the 25. Returning to the first sheet would be the icing on the cake! Thanks in advance for thinking about this.
This comment was minimized by the moderator on the site
is there a way to only do it on selected worksheets and not all?
This comment was minimized by the moderator on the site
Hello, karen,
To run the code on selected sheet, please apply the below code:
Step1: Copy anf paste the below code into the Module Window
'Replace this code with your own, but keep the script inside the parentheses
Sub LCase(ws As Worksheet)
Dim Rng As Range
Dim WorkRng As Range
On Error Resume Next
xTitleId = "KutoolsforExcel"
Set WorkRng = Application.Selection
Set WorkRng = Application.InputBox("Range", xTitleId, WorkRng.Address, Type:=8)
For Each Rng In WorkRng
    Rng.Value = VBA.LCase(Rng.Value)
Next
End Sub

Sub RunOnSelectedSheets()
    Dim ws As Worksheet
    For Each ws In ActiveWindow.SelectedSheets
        LCase ws    'change the LCase code name to your own code name
    Next ws
End Sub



Step2: Replace the first section of code above with your own code, but keep the script inside the parentheses. And change the LCase code name to your own code name.

Step3: Then, select the worksheet you want to run this code.
After running the code, your code will be executed on each of the selected sheets.

Please have a try, hope it can help you!
This comment was minimized by the moderator on the site
Terimakasih sebelumnya atas ilmu ilmu yg sudah di share. Saya sudah memakai beberapa VBA anda.

Tapi bolehkan saya meminta tolong untul mencarikan VBA yg tepat untuk mengaktifkan VBA yg sudah ada di sheet tertentu tanpa harus masuk ke sheet tersebut.

Contohnya.
Saya sudah menggunakan vBA anda yg berfungsi untuk mengurutkan data secara otomatis.

Tetapi ketika data yg saya terapkan itu berubah karena hasil pencarian data dari sheet yg berbeda. vBA tersebut tidak aktif. Harus terlebih dahulu masuk ke Sheet Tersebut untuk merubah data dengan manual barulah VBa pengurutan dat tersebut aktif.

Bisakah dicarikan VBA nya?
This comment was minimized by the moderator on the site
It works, but the current sheet is always running twice. The rest sheets are perfect and run only once!
This comment was minimized by the moderator on the site
Hello, hou,
May be you can use the below code to your need:
Sub WorksheetLoop()
         Dim Current As Worksheet
         For Each Current In Worksheets

          'Insert your code here.
           
      End Sub


Note: In the above code, please copy and paste your own code without the Sub heading and End Sub footer.

Please try, hope it can help you!
This comment was minimized by the moderator on the site
Thank you so much! But it's not working. It only runs the current sheet for several times.
This comment was minimized by the moderator on the site
How do you exclude certain sheets and add On Error Resume Next? Thanks in advance
This comment was minimized by the moderator on the site
Before xSh.selectyou have to activate
So,xSh.activatexSh.select
This comment was minimized by the moderator on the site
The code "Run the same macro on multiple worksheets at same time" works perfectly, Thanks !

However I have this error at "xSh.Select" and I don't know why...there is no issue visible in the sheets... AND I don't have any hidden sheets.

The error is '1004': Method'Select' of object '_Worksheet' failed


Thanks in advance for your help
This comment was minimized by the moderator on the site
For those wiFor those with 1004 runtime error, verify you don´t have any hidden sheets. If you do, unhide them. Then this code snippet works. Greetings.th 1004 runtime error, verify you don´t have any hidden sheets. If you do, unhide them. Then this code snippet works. Greetings.
This comment was minimized by the moderator on the site
Is there a way to make this run only on unhidden sheets? I need this code to run only on visible sheets.
This comment was minimized by the moderator on the site
or
On Error Resume Next

'above

xSh.Select

This comment was minimized by the moderator on the site
1004 runtime error
This comment was minimized by the moderator on the site
Sub Dosomething()
Dim xSh As Worksheet
Application.ScreenUpdating = False
For Each xSh In Worksheets
xSh.Select
Call RunCode
Next
Application.ScreenUpdating = True
End Sub
Sub RunCode()
With Worksheets("2018")
.EnableOutlining = True
.EnableSelection = xlNoRestrictions
.Protect Password:="workana1234", _
Contents:=True, UserInterfaceOnly:=True
End With
End Sub


Hola! he seguido las pautras pero me señala como error la fila xSh.Select.

Al dar F5 me indica que se ha producido un error 1004 en tiempo de ejecucion.

Error en el metodo "Select" de Objeto "_Worksheet"



Help!!!!
This comment was minimized by the moderator on the site
On Error Resume Next
above
xSh.Select
There are no comments posted here yet
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations