Ugrás a tartalomra

Könnyedén elolvashatja / megtekintheti az Excel számos sorát és oszlopát

Kutools az Excel számára

Növeli az Excelt 300+ verzióval
Hatékony funkciók

Ha a munkalap hatalmas adatot tartalmaz több száz sorból és oszlopból, akkor könnyen előfordulhat, hogy fejtörőhöz juthat az adatok ellenőrzése és ugrása közben, ami időt veszít. A probléma megoldásához a Kutools for Excel Grid Focus segédprogramja kiemeli a sorok és oszlopok keresztmetszetét, hogy az aktív cella vagy tartomány kiemelkedő legyen, ahogy az alábbi képernyőképen látható. Demó

lövés olvasási elrendezése 2


Engedélyezze a Grid Focus segédprogramot

Kattints Kutools > Rács fókusz a segédprogram engedélyezéséhez, miközben a Grid Focus engedélyezve van, a fül ki van jelölve.
lövés olvasási elrendezése 2


Rács fókusz beállításai

Ha módosítani szeretné a beállításokat, például az alakzatokat, stílusokat, színeket vagy az átlátszóságot, akkor lépjen a Rácsfókusz beállításas párbeszédpanel a változtatáshoz.

Kattints Kutools fülre, és kattintson a mellette lévő nyílra Rács fókusz a legördülő menü kibontásához, majd kattintson a gombra Rácsfókusz beállításai.
lövés olvasási elrendezése 2

A Rácsfókusz beállításai párbeszédpanelen módosíthatja az alakzatokat, stílusokat, színeket és átlátszóságot, ahogy szükséges, ugyanakkor megtekintheti a változás előnézetét is Preview szakaszban a módosítások alkalmazása előtt.
lövés olvasási elrendezése 2

Rólunk Jelölje ki az aktív cella területét és a Jelölje ki a területet a cella szerkesztésekor lehetőségeket.

ketyegés Jelölje ki az aktív cella területét opcióval, az aktív cella vagy tartomány ki lesz emelve.

lövés olvasási elrendezése 2

Törölje Jelölje ki az aktív cella területét opciót, de jelölje be a Jelölje ki a területet a cella szerkesztésekor opció esetén az aktív cella vagy tartomány nem lesz kiemelve, de a túlcsorduló terület kiemelve.

lövés olvasási elrendezése 2

Törölje a kettőt Jelölje ki az aktív cella területét és a Jelölje ki a területet a cella szerkesztésekor opcióknál, az aktív cella vagy tartomány és a túlcsorduló terület sem lesz kiemelve.

lövés olvasási elrendezése 2

Rácsfókusz engedélyezése: jelölje be ezt az opciót a beállítások után, és kattintson OK, a rácsfókusz automatikusan engedélyezve lesz.

Alapbeállítások: kattintson erre a gombra, a Grid Focus beállításai visszaálltak az alapértelmezett beállításokra Kutools.


Megjegyzések:

1. A gombra kattintva törölheti ezt a segédprogramot Rács fókusz parancsnál a fül világosszürke színre változik.

2. Ha több Excel fájlt nyit meg, akkor ezt Rács fókusz funkciót alkalmazzák mindegyikre.

3. Ezt Rács fókusz nem lesz automatikusan engedélyezve, amikor legközelebb elindítja a munkafüzetet.

Grid Focus Demo


Kutools az Excel számára: Több mint 300 praktikus eszköz a keze ügyében! Kezdje el a 30 napos ingyenes próbaidőszakot funkciók korlátozása nélkül. Töltse le most!

    Ajánlott termelékenységi eszközök
    A következő eszközök jelentősen megtakaríthatják az Ön idejét és pénzét, melyik az Ön számára megfelelő?
    Iroda fül: Praktikus fülek használata az Office-ban, mint a Chrome, a Firefox és az New Internet Explorer módja.
    Kutools az Excel számára: Több mint 300 speciális funkció az Excel számára 2021, 2019, 2016, 2013, 2010, 2007 és Office 365.

    Kutools az Excel számára

    A fent leírt funkció csak egy a Kutools for Excel 300 hatékony funkciója közül.

    Excel(Office) 2021, 2019, 2016, 2013, 2010, 2007 és Office 365 verziókhoz tervezve. Ingyenes letöltés és használat 30 napig.

    A Kutools for Excel képernyőképe

    btn tovább olvas      btn letöltés     btn vásárlás

Comments (17)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Why doesn't it open automatically at startup? it would be nice to remember the last setting
This comment was minimized by the moderator on the site
Hello, Mennan,
Sorry for the inconvenience, for the stability of the function, our feature is disabled when opening next time at present, but the last setting and operation can be remembered.
Thanks for your comment.
This comment was minimized by the moderator on the site
I have a problem with the reading layout. Every time when I start it, it behaves strangely. It "chose" a smaller size of the sheet than it is actually on my screen and it works in that sheet. Eg: if I see on my screen columns range from A up to AC and rows range from 1 up to 39, the reading layout chooses that my columns range from A up to half of X and rows range from 1 up to half of 32 and works in that let's call it window.
I tried to uninstall kutools and install it again, but the same problem remains.
Any wise advice would be appreciated from my side.
I am running MS office professional plus 2021.

Thanks in advance
This comment was minimized by the moderator on the site
I might detected the problem. I am running 3 displays, one from a laptop 15,6" and two others 24" over wavlink dock. All three displays are running at a resolution of 1920 x 1080. My main display is from the laptop.
I am using excel on another two 24" displays just because they have a bigger screen. When I put excel on the laptop window reading layout behaves as it should, and that is the exact size of the sheet that I previously described as a smaller window.
This comment was minimized by the moderator on the site
Hello, Dejan,
Thanks for your comment.
I have fed back this problem to the developers, if there is a an upgrade or fixed, we will let you know in the first time.
This comment was minimized by the moderator on the site
If you make this auto load when opening excel I will buy this product. :D
This comment was minimized by the moderator on the site
Hi, Andrei

Thanks for your comment, your suggestion has been fed back to the developers, if there's an upgrade, I'll let you know in the first time. 😄
This comment was minimized by the moderator on the site
Very Good Service Nice blog
This comment was minimized by the moderator on the site
Hello, Thanks for sharing this informative blog with us.
This comment was minimized by the moderator on the site
This feature is great. Bear in mind I had an existing Excel file where this button was ALWAYS disabled. I had to copy-and-paste the data out of the file and save it into a new file to get the "Reading Layout" button to enable. It then worked fine.
This comment was minimized by the moderator on the site
Hello,

Please try to update to the latest version. We have enhanced it.🙂
This comment was minimized by the moderator on the site
se eu compra a licença consigo instalar mais de uma vez no pc ou só serve uma vez ?
This comment was minimized by the moderator on the site
This solved one of my biggest headaches. I have one program that outputs a report that when exported to Excell it creates 200 worksheets! I have never been able to use it until now. Merging all of them into one worksheet only takes a few minutes with Kutools.
This comment was minimized by the moderator on the site
Thanks A lot of this product, mainly its use for reading layout & shortcuts of left side menu
This comment was minimized by the moderator on the site
My OS: Windows 7 Pro fully updated My Excel: 2010 My sheet: Range R1C6:R504C6 is in use PROBLEM: READING LAYOUT FAILS TO FILL ROW AND COLUMN SELECTED 1. Magnification: 60% 2. Rows 313-355 show 3. Cell R354:C6 selected 4. Column 5 fills to row 323. Row 354 no fill 5. Mag to 50% 6. Rows 311-357 show 7. Column 5 fills top to bottom. Row 354 fills left to right 8. Mag to 60%. Goto 4. 9. Mag to 70%. 10. Rows 319-354 show 11. Column 6 fills to row 325. Row 354 is empty. 12. Click R354:C6 13. No change! 14. WHY? NOTE: At 60% magnification selecting any cell on visible sheet on rows greater than 323 demonstrates same problem. Selecting row 323 or lower i.e R320 the function works as expected with row and column selected but only to row 323!
This comment was minimized by the moderator on the site
Hello,

Please try to update to the latest version. We have enhanced it.
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations